Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
13:19:27 - 04/24/2024

V6 Dakotas
FromMessage
marmail
Dodge Dakota
JOIN HERE
 Email

1/12/2004
21:38:12

Subject: Exshust
IP: Logged

Message:
What is the best exshust system for a v6 any Ideas thanks



superturbo
Dodge Dakota
JOIN HERE


1/12/2004
22:32:39

RE: Exshust
IP: Logged

Message:
a dynomax superturbo w/a catco or carsound cat. and once u get more mods done get sum headers



marmail
Dodge Dakota
JOIN HERE
 Email

1/13/2004
18:31:22

RE: Exshust
IP: Logged

Message:
has any one tried flow master?I live in the town where they make flowmaster i talk to a sales guy he told me that they had problems with the sound on v6 and 4 cyl I was wondering what works is dynomax the same way I just want a good rumbing sound not an jap car blaaaaaaaaaaaaaa



iMacattack
Dodge Dakota
JOIN HERE
 Email

1/13/2004
19:26:37

RE: Exshust
IP: Logged

Message:
Not withstanding the poor spelling =) I asked this same
question here and on another board. I received a bit more
info on the other board but, the general opinion is that
the Dynomax Super Turbo produced one of the smoothest
mellowest sounds. I'm considering it for my Quad Dak. the
system is a 2.5" to 3" pipe to the Super Turbo muffler,
then 3" following the OEM plumbing to a passenger side
exit.

Check them out at
http://www.dynomax.com
or download a Chrysler specifications chart at
http://www.dynomax.com/documents/trucksingle/chrysl
er.pdf

Peace
Jan



00Dak
Dodge Dakota
JOIN HERE


1/15/2004
00:07:19

RE: Exshust
IP: Logged

Message:
Dude, I have a 40 series original Flow Master on my V6 Dakota. It gave it a nice tone. It doesn't sound like a 4 banger at all, if anything it has the same sorta rumble that the 5.2 has because of the simaleraties (please forgive spelling) the two have. I have gained 2.5 mpg highway and city and I can finaly bark the tires off the line...that with the breather on it as well.



tazzy
GenIII
 Email User Profile


1/15/2004
00:14:24

RE: Exshust
IP: Logged

Message:
I'm using a "Bullet "racing muffler...good sound



camcam
Dodge Dakota
JOIN HERE


1/15/2004
01:37:20

RE: Exshust
IP: Logged

Message:
Okay, Im in the same position. I hear everyone says there all loud, but without a favored opinion what muffler can i get the deepest and loudest sound on the outside and not to loud on the inside, and still keep 2.5 in and 2.5 single out. Its between Dynomax, flowmaster, or Gibson.



J and J Auto
GenII
 Email User Profile


1/15/2004
04:03:17

RE: Exshust
IP: Logged

Message:
Dynomax 17748 or the flowmaster 50 series they
both sound about the same with the flowmaster
being just a little deeper.

The 40 series will blow you out of the cab.

I always recomend the dynomax 2.5 in out with a
single tail shows the best power on every dyno run
I have seen on the V6's unless your blown or turbo
charged than 3" is better.

I run the dynomax 17748 carsound cat 2.5 single
tail and I am stroked ported and a 268 272 cam
with a .480 lift 44 degree overlap and it runs
good why would you need to go bigger on a stock
motor is behond me.

Last dyno 267/305 14.4 @ 94 1/4 mile

$6000 invested in this motor, speed cost money

Larry
J&J Auto

J and J Auto
GenII
 Email User Profile


1/15/2004
04:06:12

RE: Exshust
IP: Logged

Message:
Opps

14.4 @ 97

Larry
J&J Auto

Chiz
Dodge Dakota
JOIN HERE


1/15/2004
09:38:18

RE: Exhaust
IP: Logged

Message:
I know they're expensive, but you may want to check out a Borla muffler too. The right ones can sound deeper than many other brands of mufflers.

I have a Dynomax and I would recommend it for this truck without hesitation. Quiet on the inside. You, the driver, knows that it's there because you drive it all the time and know how it sounds. Many people who ride in my truck don't know until I tell them (or I hit the gas or go up a hill).



Jared
Dodge Dakota
JOIN HERE


1/15/2004
18:45:36

RE: Exshust
IP: Logged

Message:
I put the gibson 1 in 2 out on mine. Its real loud inside. If your looking for quiet inside do not go with the gibson.



tomcat
Dodge Dakota
JOIN HERE


1/15/2004
19:49:53

RE: Exshust
IP: Logged

Message:
2 weeks ago i ran 40 series flowmaster deltaflow duals out the back of my 03 3.9 dak. 2.5 in. pipes and 3.5 x 18 slash tips. definite rumble and hp gains throughout. not sure on mpg yet. i highly recommend this setup. no 4 banger sound from these babies. more like a v8 sound than a six, and soundin' better everyday.



J and J Auto
GenII
 Email User Profile


1/16/2004
20:13:37

RE: Exshust
IP: Logged

Message:
tomcat

If you noticed a performance increse your mileage
should be better as long as you keep your foot out
of it.

A better breathing engine will give you better
gas mileage

Larry
J&J Auto

dan
Dodge Dakota
JOIN HERE
 Email

1/16/2004
22:35:13

RE: Exshust
IP: Logged

Message:
I just installed this system that I got from JC Whitney. Here is the link"
http://www.jcwhitney.com/webapp/wcs/stores/servlet/ProductDisplay?makeId=1000111&productId=1415&catalogId=10101&langId=-1&modelId=1001208&storeId=10101

I installed the one with the stainless angled tips on my 97 V6. It sounds great on the outside and is very quiet in the cab. I would highly recomend this system to anyone and you cant beat the price for a complete cat-back system.



marmail
Dodge Dakota
JOIN HERE
 Email

1/17/2004
14:44:39

RE: Exshust
IP: Logged

Message:
well I got the Dyno turbo just the muffler it has a mild sound and it doesn't hum on the freeway I also noticed a dropof a coulpe hundre rpms whith k&n air filter it has doped at lesat 500 rpms



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.