Forums
Forum Tools
|
 |
17:42:39 - 04/19/2024
V6 Dakotas
| From | Message |
quick 6
Dodge Dakota
JOIN HERE
11/30/2003
20:10:26
|
 Subject: Mopar Magnum heads
IP: Logged
Message:
Hello everyone I was going thru some old issues of Mopar Muscle mag,and came across a article called Magnum head games.
This article is talking about how good the Mopar magnum heads are and how you could order a Mopar Performance porting templates that will show you how to clean up the bowls and intake and exhaust runners to their specs.
They say the airflow gain would be as high as 15 percent over stock and all this would work with our stock 5/16 inch valve stems and valves. They said this is for the beginner on a budget could do this with the right tools.
So I figure more air more power so I thought I would ask the rest of you have you seen this before or did this and how did you like it and how was the performance..
I figure if they dont make it for the 3.9 why not get the 318 templates and work from them, since our 3.9 are just like the 318 without two cylinders..
I look forward to hearing from you all. quick 6
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
