| From | Message |
jeremy
Dodge Dakota
JOIN HERE
11/15/2003
12:16:43
|
 Subject: 1993 dak
IP: Logged
Message:
hey i gotta 93 dak and the 15mm heater tube that come outta the engine is torn and its spewwing antifreeze all over the place WATS UP? Is their anyone who can help me out. I tried to take the hose off mayeb go to the store and replace it but it wont budge even when i took the clamp off. O and i was wonderign what would be the best spark plugs to put in it i got bosch platinum 4s and they suck ass. thanks for any help
|
J and J Auto
GenII
11/15/2003
14:28:56
|  RE: 1993 dak
IP: Logged
Message:
just take a knife or a single edge razor blade
and split the end of the hose it will come off
Autolight AP3924 gaped .005 over factory
recomendation. or if you want to try 1 range
cooler the AP 3923
AP not the APP
If you get the reg 3923 or 3924 gap at factory
setting
The +4's do not run good in these motors they do
run very well in the 4.0 jeep motors I tried them
myself and had the 6 sitting on the shelf in my
garage gave them to my brother and he said they
run real nice in his jeep
Larry
J&J Auto
|
jeremy
Dodge Dakota
JOIN HERE
11/15/2003
17:20:21
| RE: 1993 dak
IP: Logged
Message:
hey thanks i cut the tube and replaced it o and im going to be taking my burnt out plat +4's out soon (they have only been in my truck for about 300 miles) replacing them with the autolites and gapping them. Thanks again for your help
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
