| From | Message |
rigby38
Dodge Dakota
JOIN HERE
9/06/2003
23:25:46
|
 Subject: iat relocation
IP: Logged
Message:
i have a drop on kn filter. where would i relocate the iat?
|
J and J Auto
GenII
9/07/2003
14:10:09
| RE: iat relocation
IP: Logged
Message:
Stick it in the air cleaner where the intake cold
air tube comes in.
Drill a 1/2 hole and it will screw right in, if
you need to lenghten the wires be sure tou solder
them don't use conectors, You can use a couple
scotch locks to test to see if it helps on your
truck than solder them if you plan on keeping it
there
Be sure you get a 1/4 npt plug for the hole you
take it out off. and plug the hole
Not all trucks react good ot this mod all you can
do is see how it works on yours.
Some trucks run better and even get better gas
milage from the slight timing advance the
relocation gives you.
Larry
J&J Auto
|
Ray
Dodge Dakota
JOIN HERE
9/07/2003
19:30:41
| RE: iat relocation
IP: Logged
Message:
wheres the iat located at anyways...?? yeah im not a mechanic...hence why im here.
I definitly want in on this. J and J I got the same truck as you.....3.9L w/100K miles (1993) same year?
|
rigby38
Dodge Dakota
JOIN HERE
9/07/2003
20:01:55
| help code 32 canister purge solenoid
IP: Logged
Message:
i can't get rid of this code. i put a new solenoid on it. the hoses look good. what else could it be.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
