| From | Message |
nosdart68
Dodge Dakota
JOIN HERE
9/05/2003
20:51:32
|
 Subject: IAT mod
IP: Logged
Message:
I don't know why everyone makes such a big deal about the IAT mod. I did it this past weekend and it was very easy to do. I was surprised at the difference it made too! It didn't seem to hurt my mileage at all and there is definately a notice of power. I located mine on the front of the intake tube to get the ram air effect and it works great. I would recommend this mod to anyone. So, for all you skeptics, my advice is just try it.
I can answer some questions if anyone is STILL unsure.
|
ait
Dodge Dakota
JOIN HERE
9/07/2003
01:40:17
| RE: IAT mod
IP: Logged
Message:
what did you use to seal up the hole in the intake where the sensor would have been>?
|
nosdart68
Dodge Dakota
JOIN HERE
9/07/2003
02:50:18
| RE: IAT mod
IP: Logged
Message:
i just went to my local hardware store and asked them for a 1/2 inch pipe plug. It cost me 57 cents all together. Pipe threaded bolts are different than regular bolts.
|
Ray
Dodge Dakota
JOIN HERE
9/07/2003
19:28:19
| RE: IAT mod
IP: Logged
Message:
woah woah woah...how does this all work now??? hehe...i want in... << 93 3.9L dak 100K miles.
Concept and instructions for this please.
|
nosdart68
Dodge Dakota
JOIN HERE
9/07/2003
22:35:41
| RE: IAT mod
IP: Logged
Message:
Run a search on this because it has been made into a million threads. Go to Speedtweaks website and get all the info on their tips and tricks page. It's basically just lengthening the wires to the IAT sensor and putting it in a cooler place, rather than the hot intake.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
