| From | Message |
Billy
Dodge Dakota
JOIN HERE
9/05/2003
18:11:18
|
 Subject: V8 throttlebody Question
IP: Logged
Message:
I just got a V8 throttlebody, took it out of the box and took it out to compare it to the stock one. everything looks the same, aside from the stamped V8 on top, and the paint on the cable brackets.
My question is, where the throttle cable connects looks the same on both, Is it possible that my 03 V6 has the same cable as the V8?
Also how do you disconnect the cable, not the housing, from where it connects to the arm? Is is just a push on or is there a clip holding it on?
I didn't try to pull it off as I was leaving for work, but had to see what I was getting into.
|
J and J Auto
GenII
 
9/05/2003
18:56:05
| RE: V8 throttlebody Question
IP: Logged
Message:
some have a ball stud pull straight off or slide
the clip back and remove
and some have a flat style that you need to push
the oposite way to remove
examine close to see what you have sounds like one
of these 2 types
Larry
J&J Auto
|
mo-par
Dodge Dakota
JOIN HERE
9/05/2003
19:11:14
| RE: V8 throttlebody Question
IP: Logged
Message:
the ball on the v8 TB is for the cruise control
|
J and J Auto
GenII
9/05/2003
19:59:27
| RE: V8 throttlebody Question
IP: Logged
Message:
some had the ball stud and some have the disk type
You never know untill you look, if there is a ball
on the outside its a V6 style with a disk on the
cruse and TV
You just need to look close
Larry
J&J Auto
|
Billy
Dodge Dakota
JOIN HERE
9/05/2003
23:09:33
| RE: V8 throttlebody Question
IP: Logged
Message:
Thanks for the help.
|
Roger
Dodge Dakota
JOIN HERE
3/05/2004
21:25:21
| RE: V8 throttlebody Question
IP: Logged
Message:
I don't have cruise control will this effect my performance ????
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
