| From | Message |
need help
Dodge Dakota
JOIN HERE
9/03/2003
17:50:51
|
 Subject: will these work...need help fast
IP: Logged
Message:
i have a 97 v6 dak and i found 19lb injectors off a 02 4.6 stang wil these work with my truck...
|
TimG
Dodge Dakota
JOIN HERE
9/03/2003
18:02:48
| RE: will these work...need help fast
IP: Logged
Message:
Thats what I put in my 97 Dak, they work just fine.
|
thanks
Dodge Dakota
JOIN HERE
9/03/2003
18:53:12
| RE: will these work...need help fast
IP: Logged
Message:
thanks alot man...did you notice any gains out of it
|
TimG
Dodge Dakota
JOIN HERE
9/03/2003
19:10:53
| RE: will these work...need help fast
IP: Logged
Message:
I put the ford ones in because I'm planing on other mods. It seemed alot smoother and seemed to pick up some power.
|
K-Dak
Dodge Dakota
JOIN HERE
9/03/2003
19:14:13
| RE: will these work...need help fast
IP: Logged
Message:
How much you guys picking up these 19lb injectors for off of used Mustangs??? I am looking for some and what years should I be looking at? 97 and up?
02 Graphite 3.9L RC
|
J and J Auto
GenII
9/04/2003
15:35:12
| RE: will these work...need help fast
IP: Logged
Message:
Yes the injectors will work but if you get a used
set go to autozone and get an O Ring kit for the
mustang they are the same but do not list them
for the dodge's,
Don't forget to put a little oil on the o rings
when you install them.
They will give you a smoother idle and better mid
and top end over the 1 hole wonders dodge uses
They are also matched within 2% over dodges 15%
and quiter
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
