| From | Message |
chris
Dodge Dakota
JOIN HERE
8/20/2003
18:40:58
|
 Subject: engine diag codes
IP: Logged
Message:
HELP!! I have a 99 dak with the 3.9. The check engine light came on and intermittently when i start the truck it will back fire and stall. It has done this also once while at speed (70). As soon as i turn it off and restart, it stops the rough idle/backfire/stall and runs normally. Ive changed both o2 sensors and the purge valve. The symptons remain the same. Please.....any suggestions?
|
Shank
GenII
8/21/2003
21:56:00
|  RE: engine diag codes
IP: Logged
Message:
http://autorepair.about.com/library/ts/obd-i/bl-dtcs-main.htm
http://www.minimopar.net/fault/index.html
http://dakota-truck.net/CODES/codes.html
Good Luck,
Shank
|
pbxr
GenIII
8/22/2003
07:08:19
| RE: engine diag codes
IP: Logged
Message:
Yeah first check you codes, let the truck tell you what is wrong, and go from there. Shank listed the good sites for codes, and if all else fails go to your local parts store and look them up in a book, especially when this is happening on the road.
'01 Sport Auto 3.9, CC, 3923s, Intense Cold Intake, Dynomax SuperTurbo 17748, Wal-Mart special roll on bedliner, MOOG upper and lower ball joints, V8 TB, clear corners, gutt guard, tinted,blah blah...
|
chris
Dodge Dakota
JOIN HERE
8/23/2003
09:14:02
|  RE: engine diag codes
IP: Logged
Message:
FIXED!!!!!!!! Turns out it was the Cam Position Sensor. Replaced it and poof, problem gone. Many thanks to those who responded.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
