Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
11:49:37 - 03/28/2024

V6 Dakotas
FromMessage
Tim
Dodge Dakota
JOIN HERE


6/27/2003
22:08:23

Subject: 91 V6 Dakota valve body
IP: Logged

Message:
Hey, is there some place that you guys could direct me to find out about replacing a lower valve body for a 91 V6 4speed auto. A friend has access to a new one, but neither of us have detailed info on how to change them. I know that when the pan is dropped, that's the valve body right there, but is it real involved to change? Do they just bolt right on?
Thanks



Mark green 92
Dodge Dakota
JOIN HERE


6/28/2003
00:34:41

RE: 91 V6 Dakota valve body
IP: Logged

Message:
The best source of information is a service manual. Yes they are a bolt in, they are a little work and expect to take a bath in tranny fluid. I found a site with pictures covering a transgo kit installation, I hope it helps. Make sure you use a torqe wrench on the valvebody to case bolts when you install your replacement.
http://www.dakotart.com/faqarticles/transgo_shift_kit_install/page1.htm





2000 dak 3.9
Dodge Dakota
JOIN HERE
 Email

6/29/2003
13:54:46

RE: 91 V6 Dakota valve body
IP: Logged

Message:
that instruction page link , is probably close to the most involved confusing, most easily to screw up thing i have ever seen in my life!!!

IMO do NOT attempt!!!

unless you are ASE certifed

A>K>A> know what the hell your doing!!!



Digital
Dodge Dakota
JOIN HERE
 Email

6/29/2003
18:38:22

RE: 91 V6 Dakota valve body
IP: Logged

Message:
contact wayne at aps Precision.
http://www.apsprecision.com

they make custom valve bodies for our trucks that are suited to your needs, i just ordered my and it was only like 600, he'll help you out, tell him sam said to call, his number is 1-408-455-6685.

good luck

Digital


Cold air intake/TB spacer/ 8.5mm MSD wires/MSD blaster 2/Autolite 3924/Borg-warner cap and rotor/crankcase breather/Toyo proxes s/t 275/60/15/catco hi-flow cat/custom dual straight pipes/stage 2 jet chip/ 180 t-stat/50 shot NOS :)/relocated IAT sensor/turbo in production




   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.