Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
01:23:15 - 12/11/2024

V6 Dakotas
FromMessage
93bluev6
Dodge Dakota
JOIN HERE
 Email

6/22/2003
23:20:38

Subject: gen II air cleaner
IP: Logged

Message:
hey i have a 93 3.9l and i want to get a chrome air cleaner for it. my question is what size of air cleaner will i be needing. i know the size of filter i have and what not but i don't know what size it needs to be where it attaches to the motor. i have a link to the air cleaner style i want and a pic below. if anyone can help me out.

thanks
link: http://www.edelbrock.com/automotive/autopartsphotos/air_cleaners/1207.jpg





93 DakSport
Dodge Dakota
JOIN HERE
 Email

6/23/2003
05:46:26

RE: gen II air cleaner
IP: Logged

Message:
I like the air cleaner..looks like my 14x3 inch chrome one with a recessed base...go with the 1/2 inch height raise..the 3/4 inch raise might be too much..but i doubt it...the opening where it attaches to motor is 5 1/8 inch diameter..the same as the throttle body..so puttin it on will be no prob...it will fit like a glove with the spacer..but get a better air filter like a K&N to go with it...around $25-$30 for housing..maybe $5 for the spacer and around $40-$50 for the K&N filter..you gonna love the way it feels when u hit WOT!!IT GULPS AIR>>SOUNDS MAD SWEET!!..you will need to get a different stud if i remember right though...mine all came in a kit...but that was 10 yrs ago..lol...hope this helps..matter of fact i think i'm due for a new 1 too..thx










Ray Kolbe
Dodge Dakota
JOIN HERE
 Email

6/23/2003
15:35:36

RE: gen II air cleaner
IP: Logged

Message:
I have the edelbrock 14 inch. It's good, but the only thing that sucks about these open filters is the fact that it takes in the hot air from the engine. get a hood scoop while your at it (I need to do that soon). My '93 has got a few more HP though from the 14in =D

Good stuff....costed me $55 in all (that included the edelbrock filter w/ chrome top and bottom, breather, and 1in spacer).



Joe
Dodge Dakota
JOIN HERE
 Email

6/23/2003
16:05:16

RE: gen II air cleaner
IP: Logged

Message:
I have that exact one on my 92. I like it, looks good and makes a good WOT sound.



93bluev6
Dodge Dakota
JOIN HERE
 Email

6/23/2003
17:37:53

RE: gen II air cleaner
IP: Logged

Message:
do i need the spacer, if so how much will that cost me and is that all its called is a spacer, also what size of spacer should i get?

i'm asking these questions so when i go down to the shop i know what to ask for cuz the last time i went they had no idea what i was talking about.

also, i have a parts catalog in front of me right now and the description of one air breaters says: 14" dia. with 2" element, 5-1/8" base. is this what i'm lookin for?

thanks guys!




93bluev6
Dodge Dakota
JOIN HERE
 Email

6/23/2003
18:25:05

RE: gen II air cleaner
IP: Logged

Message:
lots of the air cleaners i'm finding say they fit 'carbs with 5-18" dia. necks' i know mine is fuel injected so it has a throttlebody not a carb but is it still the same set-up, will they work on my truck?

thanks



93 DakSport
Dodge Dakota
JOIN HERE
 Email

6/23/2003
18:50:07

RE: gen II air cleaner
IP: Logged

Message:
it will work perfect..we have the same dimensions as a 4 barrel carb..get the spacer with the 5 1/8 opening to match the base..i would prob skip on the hood scoop UNLESS it extended all the way to the front..if u r in traffic nothing worse than sucking heat from outside and from the heat of the hood..and then in the winter having to worry about sucking in snow or rain..now a cowl induction hood is a different story..but i don't have the funds for that yet..the spacer is like i said ..a few bucks..under $10 definite..summit racing sells their own version for around $5..try getting the assembly with a dropped base so u can get a taller air filter...i use a fram 326 air filter and it fits fine with room to spare on top...i'm looking at building a shield to block the back of the radiator shroud so all the heat gets directed to the ground using an electric fan that puts out around 3000cfm..
ps..ask if the assembly comes with a taller stud or will it fit the stock 1..



93bluev6
Dodge Dakota
JOIN HERE
 Email

6/23/2003
18:57:36

RE: gen II air cleaner
IP: Logged

Message:
is this what the spacer is supposed to look like.

link: http://store.summitracing.com/global/images/prod/norm/EDL-8092_m.jpg





Ray Kolbe
Dodge Dakota
JOIN HERE
 Email

6/23/2003
21:15:53

RE: gen II air cleaner
IP: Logged

Message:
Yes, that is a spacer.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.