Forums
Forum Tools
|
 |
17:36:56 - 04/25/2024
V6 Dakotas
| From | Message |
justin d
Dodge Dakota
JOIN HERE
6/07/2003
22:41:07
|
 Subject: steel works, what exactly is it?
IP: Logged
Message:
hey, i was on justin(idol pimp) website on cardomain, and i was wondering where i can get "steel works" to do a gutter guard grill? thanx
jd
|
1_Bad_Dakota
Dodge Dakota
JOIN HERE
6/08/2003
00:07:12
|  RE: steel works, what exactly is it?
IP: Logged
Message:
Lowes or Home Depot, its a thin metal strip, click on idol_pimpz site, I might have a pic there!
|
justin d
Dodge Dakota
JOIN HERE
6/08/2003
20:02:54
| RE: steel works, what exactly is it?
IP: Logged
Message:
can someone explain the hood latch setup? i dont quite understand, does it come through the gutter guard grill? like flat w/ the top of the grill? thanx
jd
|
pbxr
GenIII
6/09/2003
08:56:25
| RE: steel works, what exactly is it?
IP: Logged
Message:
Here is what I did for my hood latch. I bought a heavy picture hanging kit, a few bucks, that has a steel cable. I tool a piece of old fish tank hose, imo any type of small diameter hose would work. I fed the steel cable through the hose, cable tied the hose right down the center of the grill. Wrapped the cable around latch, cable tied this as well. Then finally used an old key ring, formed a loop in the steel wire at bottom for key ring, bam your done. I have had this setup for almost 6 months, with no problems.
'01 Sport Auto 3.9, CC, 3923s, Intense Cold Intake, Dynomax SuperTurbo 17748, Wal-Mart special roll on bedliner, MOOG upper and lower ball joints
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
