| From | Message |
Dangerous
Dodge Dakota
JOIN HERE
4/17/2003
08:47:07
|
 Subject: Next step
IP: Logged
Message:
Im looking for some advice. I just recently installed a powerstack 7" stage 3 cold air intake, I also have relocated the IAT sensor, have dual flowmasters and have a F & B throttle body being shipped to me as we speak. I wanna know what would be the best direction to take now. I still have my stock plugs, wires, thermostat and cap & rotor. I was thinking about getting different gears, but dont know what kind or type or how much I would be looking to spend. I know there is a lot of guys on here that know there stuff and I would appreciate it if I got some help. I got beat by a 95 4.6L mustang gt last night (even though it was close) and I want more power. Any feed back would be a big help. Thanks...
|
Dangerous
Dodge Dakota
JOIN HERE
4/18/2003
12:34:09
| RE: Next step
IP: Logged
Message:
I would appreciate it if anyone here has any new ideas besides the plugs wires and thermastat.
|
MexiMelt
Dodge Dakota
JOIN HERE
4/18/2003
13:36:07
|  RE: Next step
IP: Logged
Message:
Buy a Mustang 5.0!!!!!!!!!!!!!!!
|
Cal Dak
Dodge Dakota
JOIN HERE
4/18/2003
13:41:50
| RE: Next step
IP: Logged
Message:
no never buy a rustang. It looks like you've got the basics done. Maybe you could try the 1.7 roller rockers. that should help out the upper rpm band. Also, do replace the plugs, and the other stuff. You will notice a difference.
other than that you could go for the 3.92 gears. not too sure about prices. Possibly buy the mopar pcm, which should definetly help if you are getting the 1.7 roller rockers so that the power limiter will let the engine get to its new sweet spot. Thats it for me.
|
Dangerous
Dodge Dakota
JOIN HERE
4/21/2003
07:48:25
| RE: Next step
IP: Logged
Message:
Thanks Cal Dak.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
