| From | Message |
jay
Dodge Dakota
JOIN HERE
4/09/2003
00:15:30
|
 Subject: ignitions coils
IP: Logged
Message:
I'm looking to pick up some igntion coils. Anyone got any advice on brands or places to purchase them from
|
IntenseDak39
*GenIII*
4/09/2003
12:28:38
| RE: ignitions coils
IP: Logged
Message:
well, i'll start off by saying you only need one.
MSD and ACCEL are the most popular
Turbocharged V6
|
stealwings582
GenIII
4/09/2003
14:04:20
| RE: ignitions coils
IP: Logged
Message:
I have a MSD blaster coil. Deffinately worth it. It also gives you the opportunity to widen the spark plug gap a bit.
Wouldn't want any other!
|
99V6Lurker
Dodge Dakota
JOIN HERE
4/10/2003
18:45:06
| RE: ignitions coils
IP: Logged
Message:
I had an MSD Blaster, it went out on me on the highway recently. Thank the maker i had the foresight to leave my oem coil in place. Just switched wires and drove home. Threw the old one in the trash.
I also had an MSD ignition which went out on me just a month before the coil. I will never buy another MSD product. Ignition was less than a year old. The coil went just over a year.
|
Digital
Dodge Dakota
JOIN HERE
4/10/2003
19:28:35
| RE: ignitions coils
IP: Logged
Message:
Same here, I bought a MSD Blaster and the SOB caused misfires and idle warble. DON'T buy the MSD 8228, it sucks
Digital Dreamer
1999 3.9L dakota ext cab
airaid CAI/Throttle body spacer/Stage 2 jet chip/8.5mm ignition wires/platinum 2 plugs/gauges/altezza lights
|
87RT
Dodge Dakota
JOIN HERE
4/10/2003
22:40:57
| RE: ignitions coils
IP: Logged
Message:
I got an Accel coil 2years ago and its still working, I just got some 8mm wires to go with it.
|
Jay Wingate
Dodge Dakota
JOIN HERE
4/11/2003
18:25:26
| RE: ignitions coils
IP: Logged
Message:
Got the MSD 8228 and haven't had a problem. But also didn't see any difference. But didn't expect one.
|
stealwings582
GenIII
4/14/2003
10:38:36
| RE: ignitions coils
IP: Logged
Message:
I guess there's good and bad with all products but the MSD Blaster works good for me and I haven't had any problems. The ignition box they sell was a different story. It kept trying to advance the timing and conflict with the Jet chip.
Wouldn't want any other!
|
IntenseDak39
*GenIII*
4/14/2003
11:46:14
| RE: ignitions coils
IP: Logged
Message:
stealwings,
how did it try to advance the timing?
btw, i have been running the MSD 6a, Blaster 3 coil and 8.5 mm wires for over two years now... no problems so far (except many toasted rotors and caps)
Turbocharged V6
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
