Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
07:21:25 - 04/29/2024

V6 Dakotas
FromMessage
Marlow
Dodge Dakota
JOIN HERE
 Email

3/30/2003
08:37:09

Subject: Lower Shock bolt...HELP!!
IP: Logged

Message:
'98 2wd V6 CC. Changing front shocks last night and broke both lower shock bolts on the drivers side due to excessive rust. Local Dodge parts dept is not open until tomorrow morning...Where can a person find an auto-quality bolt to replace this?...
Anyone have problems with the shock rod turning in place and making it very difficult(impossible) to remove the front upper shock nut? I've tried a vice grip but you cant get a solid grip on the rod through the front spring, and it just continues turning....Any suggestions would be appreciated.....



Marlow
Dodge Dakota
JOIN HERE
 Email

3/30/2003
10:47:07

RE: Lower Shock bolt...HELP!!
IP: Logged

Message:
Any suggestions on aftermarket shock bolts? Cmon peeps....



Jon
Dodge Dakota
JOIN HERE
 Email

3/30/2003
11:21:09

RE: Lower Shock bolt...HELP!!
IP: Logged

Message:
A regular home hardware store sells everything from grade 2 to grade 8 hardware. For a shock i would go with a regular grade 5 bolt, there isn't much stress on them. As for the top nut, usually if you zip it with an impact gun it will come right off. Also a parts store might carry the special socket that you use to break the shock bolt off. I usually cut them off with a torch.

-Jon



Marlow
Dodge Dakota
JOIN HERE
 Email

3/30/2003
11:37:34

RE: Lower Shock bolt...HELP!!
IP: Logged

Message:
Thanks for the input...




93 Dakota
Dodge Dakota
JOIN HERE


4/07/2003
21:59:05

RE: Lower Shock bolt...HELP!!
IP: Logged

Message:
I just changed all four shocks on my 93 Dakota.

I didn't have any problem with any of the lower bolts. But the upper ones in the front were a bear. Either get yourself a nut splitter and crack it off, or do what I did: I made slots in shock piston with a Dremel tool so that my vice grips would grab it. Then I was able to twist the nut and actually I twisted the shaft off. Doesn't matter though, since that was enough to get it off.



mia pron khal
Dodge Dakota
JOIN HERE
 Email

12/20/2018
18:11:25

GQxSKEyTatLlQVKBQnT
IP: Logged

Message:
xnYPEq Regards for this post, I am a big fan of this web site would like to go on updated.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.