| From | Message |
Richard in Fl
Dodge Dakota
JOIN HERE
3/14/2003
18:29:21
|
 Subject: Air Intake systems
IP: Logged
Message:
I was ready to order a K&N air intake system ,until I read about the problems people are having making the 5.9 model fit on the 3.9( mine is a 2003). I was surfing the web and found one for the 3.9 by a company called 360 Air Intakez, Kool Shot. Any heard or have one of these and how do they compare with the K&N and Airraid models. And do you have to bend A/C lines or move the cruise control ETC, to install it. Thanks for the help
|
DakotaDan
*GenIII*
3/14/2003
18:49:09
|  RE: Air Intake systems
IP: Logged
Message:
Nothing hard about it.
http://www.dodgetruckworld.com/mygallery.asp?id=3242&album=6696
Dan
Next Time You Think You're Perfect
~~~~~Try Walking On Water~~~~~
|
forexfour
GenIII
3/15/2003
01:12:08
|  RE: Air Intake systems
IP: Logged
Message:
I got the air raid for mine but I kept my enclosed filter box just in case I get into a really wet situation!!
I like the air raid but that does not answer your question, sorry I am not familiar with the brand you mentioned.
Never late for a Tee time or wheelin with my buddies! Always ready for both!!!Forexfour's home
|
Ernie Miller
Dodge Dakota
JOIN HERE
3/15/2003
11:56:59
| RE: Air Intake systems
IP: Logged
Message:
I got the Intense Intake stage II
www.intenseperformance.com
I think it works great! Cost me $154 and I think some shipping costs, can remember exactly. It was a simple install with good instructions if you need them.
Thinking of upgrading the throttle body next.
|
Ernie Miller
Dodge Dakota
JOIN HERE
3/15/2003
12:05:24
| RE: Air Intake systems
IP: Logged
Message:
Wait, let me correct that amount...
I got the 7" Big Mouth Stage II - $140.00
I think the $154 amount was with shipping, etc.
|
Pistolero
Dodge Dakota
JOIN HERE
3/15/2003
22:28:03
| RE: Air Intake systems
IP: Logged
Message:
Try the Intense Performance Stage 2 with the 7" Power Stack filter for the 3.9 V6. That's what I've got...cost me $125 plus shipping. It's been tested and shown that it flows enough to support a 600HP motor...I don't think most people will come anywhere near that with a 3.9.
|
NJQCDak
GenIII
3/17/2003
20:05:28
| RE: Air Intake systems
IP: Logged
Message:
I installed a volant air intake. It was made for 5.9L but she fits on the 3.9 V6. I didn't have to move the Cruise Control. I didn't think people had problems with the K&N gen II kit. Only a problem of cracking (I thik K&N corrected this). There is one made for the later daks and relocating the CC unit.
'01 QC Sport, 3.9L V6, 5spd, 2wd, Volant Intake,
SS Gibson exhaust, MSD Wires, Accel Super Coil, NAPA Cap, Flometrics Billet 48mm TB , JBA Silver Ceramic Headers, Autolites 3923s, R/T front swaybar & Quickor rear swaybar, KYB Monomax shocks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
