| From | Message |
pbxr
GenIII
12/04/2002
11:58:47
|
 Subject: 48mm or 50mm for a 3.9
IP: Logged
Message:
looking into buying a tb, but the question is 48mm or 50mm, for my '01 3.9, and why.
Which would be better with the listed few mods below and why. thanks
'01 Sport Auto 3.9, CC, 3923s, Intense Cold Intake, Dynomax SuperTurbo 17748, Wal-Mart special roll on bedliner, MOOG upper and lower ball joints
|
DakotaDan
*GenIII*
12/04/2002
12:25:06
|  RE: 48mm or 50mm for a 3.9
IP: Logged
Message:
pbxr
I went the cheaper route, I bought a new V8 TB & Cable from Dodge got about $200. in it Plus I have sense ported it (remove the TQ step & air horns)
If I had it to do over again knowing what I do now I would go with the F&B 48mm ............No porting No air horns No tq step & No cable change, It would be worth the extra .....IMOA
Dan
Next Time You Think You're Perfect
~~~~~Try Walking On Water~~~~~
|
pbxr
GenIII
12/04/2002
12:29:25
| RE: 48mm or 50mm for a 3.9
IP: Logged
Message:
is there any significant diff. between the 48 and 50, or will the 48 work better than the 50? theres a groups buy and I am debating, I just want to make sure I'm spending the dough on something that will make a differance and not a waste of cash. Thanks for the reply
'01 Sport Auto 3.9, CC, 3923s, Intense Cold Intake, Dynomax SuperTurbo 17748, Wal-Mart special roll on bedliner, MOOG upper and lower ball joints
|
rtdkota
R/T
12/04/2002
12:39:36
| RE: 48mm or 50mm for a 3.9
IP: Logged
Message:
F&B 48 is perfect for the 3.9L-- Unless you are doing a cam, head work.. the 48mm works great.. actually flows more than a stock V8 tb, and has the correct velocity for the 3.9L--
If you want more info, let me know.
sam
F&B TB worker bee
RTDKOTA
|
DakotaDan
*GenIII*
12/04/2002
12:39:44
| RE: 48mm or 50mm for a 3.9
IP: Logged
Message:
pdxr
With the mods you have listed the 48mm will cover you for a good while.
You should have a turbo or supercharger if going bigger than that.
Dan
Next Time You Think You're Perfect
~~~~~Try Walking On Water~~~~~
|
DakotaDan
*GenIII*
12/04/2002
12:41:38
|  RE: 48mm or 50mm for a 3.9
IP: Logged
Message:
pbxr
There's your F&B man !!!!
Dan
Next Time You Think You're Perfect
~~~~~Try Walking On Water~~~~~
|
pbxr
GenIII
12/04/2002
12:53:51
| RE: 48mm or 50mm for a 3.9
IP: Logged
Message:
thanks guys, this definatly helps. I 'm sure you can understand that I wanted to make the right choice as far as size. Honestly I was afraid of going to small/big for the buck. As always you guys have helped again, thanks for the replies.
'01 Sport Auto 3.9, CC, 3923s, Intense Cold Intake, Dynomax SuperTurbo 17748, Wal-Mart special roll on bedliner, MOOG upper and lower ball joints
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
