| From | Message |
Troy
Dodge Dakota
JOIN HERE
11/24/2002
20:48:31
|
 Subject: Electric Fans
IP: Logged
Message:
Details: 2001 3.9Lv6 4X2 Auto.
I plan on taking off the clutch fan and installing a blackmagic 150 electric fan. Looking at the radiator from the front of the truck, urrently there is already an electric fan behind the radiator. Then there is the clutch fan. Now once I remove the clutch fan, do I have to relocate the stock electric fan and put the BM 150? Or do I put the BM 150 infront of the radiator? Any help would be appreciated. Thanks
|
DakotaDan
*GenIII*
11/24/2002
21:01:20
|  RE: Electric Fans
IP: Logged
Message:
The electric fan is controled by the PCM and usually only used when the AC is on.
There have been some issues with wiring the BM 150 and other elc. fans to work with the Ac compresser.
Dan
Next Time You Think You're Perfect
~~~~~Try Walking On Water~~~~~
|
Troy
Dodge Dakota
JOIN HERE
11/24/2002
21:18:52
|  RE: Electric Fans
IP: Logged
Message:
SO how should the setup look like?
|
Dakota Bob
GenII
11/24/2002
23:13:22
| RE: Electric Fans
IP: Logged
Message:
you all ready have the fan for the a/c the BM 150 don't have to be hooked up to the a/c it comes with instructions on how to hook it up with out a/c and it has a built in t-stat.My 94 Dak has the clutch fan and it wasn't enough cooling power for me when I was towing my boat so Ii went back to the stock fan. Hoope this helps.
Bob
94 CC 3.9 Stage2 Chip,JBA Headers,19# FI,Flow Master 40s, Bosh Plat.Plugs, K/N Chrome Filter, 195 T Stat ,Flometrics TB, Mopar Wires
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
