| From | Message |
Jon
Dodge Dakota
JOIN HERE
10/11/2002
20:51:23
|
 Subject: !*&@$*# Water Pump
IP: Logged
Message:
Have any of you had problems getting that stupid little heater tube o-ring to seal? I ended up using a thicker one from a kitchen faucet. It doesn't leak now but it took an hour longer than it should have to replace it because of all the screwing around with the o-ring. Why can't they put a nipple on the pump that the hose slides onto?
Btw. this is a Dodge remanned water pump with a new dodge o-ring.
-Jon
|
tony
Dodge Dakota
JOIN HERE
10/12/2002
01:11:04
| RE: !*&@$*# Water Pump
IP: Logged
Message:
I had no problem with the o ring. Guess it was just bad luck for ya
|
Simpleman96
Dodge Dakota
JOIN HERE
10/12/2002
08:03:47
| RE: !*&@$*# Water Pump
IP: Logged
Message:
I had the same problem when I bought a cheap water pump $20. I ended up having to buy a $60 bosch pump and the o-ring worked fine. The bosch pumps tube hole was a machined surface. Better than OEM.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
