Forums
Forum Tools
|
 |
01:47:07 - 04/26/2024
V6 Dakotas
| From | Message |
bc
Dodge Dakota
JOIN HERE
10/05/2002
16:50:23
|
 Subject: Remove of hub assembly???? 2000 4x4 dak
IP: Logged
Message:
Got no response on the general forum, so I thought I'd try here:
Has anyone replaced the hub assembly on a 2000 4x4 dak before? It shouldn't be this hard, I've got all the bolts out of the assembly, but the damn thing refuses to come out. It is possible it is rusted on, but I doubt it.
I have tried everyong to get it off, am I missing something????
|
bc
Dodge Dakota
JOIN HERE
10/06/2002
23:25:23
| RE: Remove of hub assembly???? 2000 4x4 dak
IP: Logged
Message:
FYI: updating my own post.
I got the hub assembly out. I had to use a 10 .lbs slide hammer with an axle pulling attachment. It was a royal PIA, took me an hour of using the slide hammer and lot of liquid wrench to get it out. Putting the new one in was a piece of cake. The old one had pretty much rusted into place which is why it was such a pain to get out.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
