| From | Message |
mdbohica
Dodge Dakota
JOIN HERE
8/24/2002
14:23:44
|
 Subject: Engine Missing, HELP!!!!!!!!!!!
IP: Logged
Message:
OK, currently near suidide.
97 3.9L 2wd,
Engine runs rough/misses at idle and just above idle when at normal operating temp.
Changed: Plugs, cap, rotor, wires, pcv.
Truck cruises fine and gets normal milage.
Any suggestion??? I am going to load my Glock.
|
DakotaDan
*GenIII*
8/24/2002
14:42:57
|  RE: Engine Missing, HELP!!!!!!!!!!!
IP: Logged
Message:
go to AutoZone for a free computer code check !
Dan
K&N FIPK # 57-1517 * DynoMax #17748
OEM 5.2/5.9 V8 TB #53032691AA * Crower 1.7 Roller Rockers # 73654K
Factory Flares * WeatherTechs * Saddleman Low Profile Tonneau
|
icemanKY
Dodge Dakota
JOIN HERE
8/24/2002
16:55:34
| RE: Engine Missing, HELP!!!!!!!!!!!
IP: Logged
Message:
i agree with dan get the codes checked.. i just had mine on the computer yesterday and fixed my missing problem it was a bad tank of gas that stopped up 1 injector and it was still missing but barely noticeable soo i took the injectors and rail out and cleaned them all seems to be running perfect now but i'm still going to change the other injectors to be on the safe side :)
|
Pistolero
Dodge Dakota
JOIN HERE
8/25/2002
01:11:08
| RE: Engine Missing, HELP!!!!!!!!!!!
IP: Logged
Message:
You might also try cleaning your IAC solenoid on the back of your TB...remove the TB to do it right.
What caliber Glock do you have? Any other pistols? I have several...hence, the handle.
|
mdbohica
Dodge Dakota
JOIN HERE
8/25/2002
10:15:32
| RE: Engine Missing, HELP!!!!!!!!!!!
IP: Logged
Message:
Pistolero,
Mine is a Glock 22 in 40 Cal. with some upgrades. I also have a S&W Sigma in .40 and a few others.
|
kryp2nite
Dodge Dakota
JOIN HERE
8/25/2002
17:51:15
| RE: Engine Missing, HELP!!!!!!!!!!!
IP: Logged
Message:
smith and wesson (sp?)
the original point and click interface
|
Pistolero
Dodge Dakota
JOIN HERE
8/25/2002
19:17:01
| RE: Engine Missing, HELP!!!!!!!!!!!
IP: Logged
Message:
MD, I realize we're getting off the topic of this thread...but I always like to say "hey" to another shooter. I've got 3 in .40 S&W, but no Glocks, although that is a good, solid piece, and I've shot a few. I handload for 8 pistol calibers, but I've gotten to where I don't like cleaning them as much as I like shooting them, so I haven't been doing it too much lately. The new Dak and thoughts of mods have been taking up my time, instead...;-) Have a great day!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
