Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
04:00:56 - 03/29/2024

V6 Dakotas
FromMessage
Roger Benge
Dodge Dakota
JOIN HERE
 Email

8/20/2002
16:47:07

Subject: JB upper intake cleaner
IP: Logged

Message:
Does any one know anything about JB upper intake cleaner. I just had my 2000 4x4 3.9 liter in for break service and they said i need alot of other things done. one of which is and upper intake cleaning with JB upper intake cleaner. They also said there was a plate on the bottom of the intake that they needed to pull off and clean inside. Can any one help me i want to make sure they arent tryingto rip me off before i tell them to do it.

Thanks




John Cassell
Dodge Dakota
JOIN HERE
 Email

8/20/2002
20:13:42

RE: JB upper intake cleaner
IP: Logged

Message:
Can't speak of JB upper intake cleaner, but I just replaced the gasket on the plate (called a plenum plate). If you open up the throttle and look down inside the motor, and see a lot of oil. You need to replace the plate gasket. Dodge makes a kit with a new pan and different type of gasket. Ping and hesitation can also be a sign of a blown gasket. Remember to use new intake bolts if you do this job. Factory bolts are the use once type.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.