| From | Message |
sicminds
GenIII
8/18/2002
14:50:20
|
 Subject: TV Cable Adjustment, like whoa
IP: Logged
Message:
I finaly got around to adjusting my tv cable.
It was really loose, went out to test
it on the road and now my truck kicks er
side ways from a dead stop. This was defintely
needed. What makes it seem like theres more power?
it was good at first, then when i went to the localwally world(wal-mart) 15 miles away,and on the way bck i sprung a check engine light.
I love the new power increase but whats
with the check engine light. Thanks
in advance.....
going to autozone later to get it scanned
now you know thats..................
sic
|
Jon
Dodge Dakota
JOIN HERE
8/18/2002
16:48:17
| RE: TV Cable Adjustment, like whoa
IP: Logged
Message:
It justs changes how hard the tranny shifts, if you adjust it too far out of spec it will throw a code.
|
sicminds
GenIII
8/18/2002
17:03:07
| RE: TV Cable Adjustment, like whoa
IP: Logged
Message:
Threw the same ole 351 and the 121.
Then how come it seems like its faster
and can burnout like crazy now
now you know thats..................
sic
|
DakotaDan
*GenIII*
8/18/2002
17:08:57
|  RE: TV Cable Adjustment, like whoa
IP: Logged
Message:
P0351 Ignition Coil #1 Primary Circuit
P0121 TPS voltage does not agree with MAP
Doesn't look like it had anything to do with the TV cable
Dan
K&N FIPK # 57-1517 * DynoMax #17748
OEM 5.2/5.9 V8 TB #53032691AA * Crower 1.7 Roller Rockers # 73654K
Factory Flares * WeatherTechs * Saddleman Low Profile Tonneau
|
sicminds
GenIII
8/18/2002
17:15:09
| RE: TV Cable Adjustment, like whoa
IP: Logged
Message:
i keep gettin that TPS code since i modded it a long time ago. But then when i took it in there replaced the TPS and it still sends that signal.
I am wondering if i should mod it again.
I think the 351 is from my MSD 6a, blaster 3 without the tach adapter
now you know thats..................
sic
|
FlameRed01
Dodge Dakota
JOIN HERE
8/19/2002
08:20:06
| RE: TV Cable Adjustment, like whoa
IP: Logged
Message:
the 351 is from your msd, its not hooked up correctly, and not hookin up the tach adapter wont hurt, mines not hooked up, why do you have a blaster 3? if i recall correctly you should have a blaster 2 or a blaster ss which are more compatible with the 6a box
|
92whitedak
Dodge Dakota
JOIN HERE
3/19/2004
16:36:15
| RE: TV Cable Adjustment, like whoa
IP: Logged
Message:
Hey sic
How did you go about adjusting the TV cable. I remember reading it somewhere a long time back but I'm interested in doing it now that my a500 seems to be acting up. Want to eliminate all possibilities. Any help is appreciated.
|
GB2000
GenIII
3/19/2004
17:03:05
| RE: TV Cable Adjustment, like whoa
IP: Logged
Message:
This helped me even better than my Hayne's manual:
http://www.speedtweaks.ca/tipsandtricks.php#TVCable
Josh
Red 98 RC V6 2wd Single in/dual out exhaust (soon to be switched to a flowmaster 40 single in/dual out), s-bolt "mod", Edelbrock 10" round air cleaner w/ K&N air filter, removed rubber flap...and more to come
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
