| From | Message |
Truckboy
Dodge Dakota
JOIN HERE
8/15/2002
19:34:59
|
 Subject: The Bog
IP: Logged
Message:
I have a question.. I installed some mods as per my profile and can't understand why my truck bogs from a dead stop when I floor it then it picks up after revs increase (expected). Is this normal or have I missed something?
Dak 98 V6 auto,V8 TB, K&N filter, Iat in intake box,TPS mod,BW brass cap & rotor, JBA 9mm wires,
Autolite 3923 plugs, Accel coil, Magnaflow muffler.
|
Jon
Dodge Dakota
JOIN HERE
8/15/2002
19:45:05
|  RE: The Bog
IP: Logged
Message:
It's normal, they cam profile on this truck doesn't really kick in till about 3,000 rpm. You can do your best to reduce the bog down by making sure the timing chain isn't stretched out. The only way to get your truck to produce more low end would be a cam or gearing.
It's not really a big deal because if your racing your going to launch at about 2,500 rpms and keep them up above 3,500 when your going through the gears.
-Jon
|
Truckboy
Dodge Dakota
JOIN HERE
8/16/2002
01:21:55
|  RE: The Bog
IP: Logged
Message:
Thanx Jon
|
street guy
Dodge Dakota
JOIN HERE
8/18/2002
10:08:59
| RE: The Bog
IP: Logged
Message:
a miss-adjusted TPS will cause the very problem you describe, it is not normal to have this, nor does the cam come into play.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
