| From | Message |
crak n jak
Dodge Dakota
JOIN HERE
7/17/2002
22:57:25
|
 Subject: intake manifold mod
IP: Logged
Message:
I have a 1994 dakota, and I am going to port/polish the manifold. From all the post I have read on this, I have a good idea what to do. The question is my manifold has the EGR tube in the Plenum. Do you recommend cutting that out, if so how far should I go down. Second what would be the benifits for removing that tube and plugging it up or should I just leave that alone.
Thank You to all
|
intense99dak
Dodge Dakota
JOIN HERE
7/18/2002
15:47:13
|  RE: intake manifold mod
IP: Logged
Message:
I'm not sure if you can cut the EGR out of the emissions system or not, but it would be easier if you kept it. I don't see how ommitting it would generate any more hp/torque.
I don't know if you've seen this page or not, but it goes into detail about modding your intake and it covers intakes with EGR ports.
www.fast4x4.net/manifold_mod.htm
On another note, I have an extra manifold that would fit your Dak (I bought it before I realized there was a difference between years) if you want one to modify while still running your current one.
Chuck Robbins
'99 IB Dakota Sport
Visit my site at intense99dak.com
|
crak n jak
Dodge Dakota
JOIN HERE
7/19/2002
13:02:53
| RE: intake manifold mod
IP: Logged
Message:
thank you anyways intense but I already purchased a spare for it to mod. I am still wondering though if I would get anymore hp/torgue if i removed it. Or would it just hurt the performance.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
