Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
09:41:03 - 03/29/2024

V6 Dakotas
FromMessage
Arnie
Dodge Dakota
JOIN HERE
 Email

6/29/2002
23:02:10

Subject: 1988 Dakota engine fire
IP: Logged

Message:
This board has been extremely helpful in the past. I have a 1988 3.9 Dakota, standard tranny and had a small fire behind the carb. Most likely a fuel line. It needs a wireing harness complete as well as some other items. I have a located a harness that is intact from a 1988 vehicle with an auto tranny. will the harness from the auto tranny vehicle work in my standard tranny truck? On the way home from locating it I talked to a parts store employee and he said that it wouldn't work and I called the dealership upon arriving home and the part # for both vehicles is the same. Any help would be greatly appreciated.
Thanks Arnie



IntenseDak39
*GenIII*
 Email User Profile


6/29/2002
23:05:41

RE: 1988 Dakota engine fire
IP: Logged

Message:
dont quote me but it should work.. you might just have a few extra plugs

supercharged-intensedak3.9

TigerDak
Dodge Dakota
JOIN HERE


6/30/2002
00:55:53

RE: 1988 Dakota engine fire
IP: Logged

Message:
What is the vehicle? If the part number is the same, it will probably work. But if its some Chebbbby vehicle, with the same part number, probably not. If its a Chrysler vehicle, with the same part number, probably. It is a small price to pay if you want to chance it. DO NOT GET YOUR NEW PART FROM THE DEALER!



arnie
Dodge Dakota
JOIN HERE
 Email

6/30/2002
02:01:40

RE: 1988 Dakota engine fire
IP: Logged

Message:
Thanks for the quick response. I should have been more clear that the 1988 vehicle I located is a 1988 Dakota as well, just different tranmissions. The dealer does not even have available the part although when I contacted them , they indicated that there was only (1) part number for the wiring harness for both the auto transmission and the standard which I have. These harnesses are few and far between so I would like to be sure that the one I put a deposit on this morning will work..
Thanks all for any and all input. Arnie



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.