| From | Message |
Old Bill B
Dodge Dakota
JOIN HERE
8/06/2011
21:27:36
|
 Subject: New Plug Wires Too Short
IP: Logged
Message:
I bought a new (best quality) plug wires from Carquest and 2 of the wires are too short.
I can't put them into the plastic clips on the valve cover, I have to let them touch the hot valve cover.
Another wire is also too ahort and rubs tightly on the heat pipe that goes to the air cleaner.
Carquest re-checked the part number and the IS the correct set for my truck.
1991 V6 standard tranny.
Thanks in advance for any help.
|
Curly
Dodge Dakota
JOIN HERE
8/07/2011
13:16:21
| RE: New Plug Wires Too Short
IP: Logged
Message:
You are sure you removed 1 wire at a time and
matched the length exactly? If so I would take them
back for a refund.
|
Bob Lincoln
Dodge Dakota
JOIN HERE
8/08/2011
08:10:54
| RE: New Plug Wires Too Short
IP: Logged
Message:
Try a Belden wire set from NAPA. They are OEM quality, never had a problem fitting them.
|
Old Bill B
Dodge Dakota
JOIN HERE
8/08/2011
10:30:08
| RE: New Plug Wires Too Short
IP: Logged
Message:
CURLY: Yes one at a time, 2 of my old wires are about 1 to 1.5 inches longer than even the longest wire in the new set.
Bob Lincoln: I may have to do that.
The truck runs better with the news wires, I just can't use the clip holder on the right bank (pass side).
I may also get those plastic wire covers to put on where it rubs on metal.
Thanks guys for your help.
|
harry from ct
Dodge Dakota
JOIN HERE
8/22/2011
20:59:44
| RE: New Plug Wires Too Short
IP: Logged
Message:
get a set of summit racing wires 8 mm with new cap and rotor
SUM-867624CR
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
