| From | Message |
brad
Dodge Dakota
JOIN HERE
5/08/2002
19:01:23
|
 Subject: wiring diagram
IP: Logged
Message:
does anyone have a wiring diagram for a 2000 dak 3.9l? I was looking for things like air flow sensors fuel sensors stuff like that.
|
billy
Dodge Dakota
JOIN HERE
5/09/2002
22:07:53
|  RE: wiring diagram
IP: Logged
Message:
i thought the air sensore was in the throttle body, one trick you can think about is knocking the honey comb mesh out of it so that the air can flow better, that is the only difference between stock and "massair sensors" but remember if you ever go to the mountians it is not a good idea to take out cause your truck will not run good up there with out it, and be sure not to touch the senser in it or oyur check engien light will come on
|
dodgeboy
Dodge Dakota
JOIN HERE
5/09/2002
22:14:32
| RE: wiring diagram
IP: Logged
Message:
whew...dont even know where to begin correcting that statement.. :)
|
rick
Dodge Dakota
JOIN HERE
11/25/2003
19:15:02
| RE: wiring diagram
IP: Logged
Message:
I NEED A TRANS DIAGRAM TO SEE WHICH SOLENOID IS FOR THE TORQUE CONVERTOR LOCK UP.
|
dude
Dodge Dakota
JOIN HERE
11/25/2003
19:52:55
| RE: wiring diagram
IP: Logged
Message:
dodgeboy is right
what the hey? I am so confused....
|
Tazzy
GenIII
11/25/2003
21:10:28
| RE: wiring diagram
IP: Logged
Message:
Got the S/M what do u need?
Brass Cap& Rotor
K&N Home brew CAI
Full MSD6a
Ported TB.
Superchips program
Crank Sensor Mod
Bullet Muffler
|
JCM
Dodge Dakota
JOIN HERE
11/26/2003
09:38:51
| RE: wiring diagram
IP: Logged
Message:
Brad,
I bought a Chilton Manual for my 2000 Dakota and it has wiring diagrams in it. Check it out.
|
Haynes
Dodge Dakota
JOIN HERE
11/26/2003
10:18:13
|  RE: wiring diagram
IP: Logged
Message:
Chiltons Suck !!!!!
|
Kevin Morgan
Dodge Dakota
JOIN HERE
3/12/2006
19:43:16
| RE: wiring diagram
IP: Logged
Message:
I am looking for a wire diagram for a Dodge Dakota. 92 six cyl.
|
josh
Dodge Dakota
JOIN HERE
4/20/2006
23:23:45
| RE: wiring diagram
IP: Logged
Message:
Two questions first I just gave my truck a tune up and before i did it was idiling with a 2oo rpm difference and i had fuel coming out of my exhuast i took it to the dealer and they are the ones who said to give it a tune up. I also have a green wire hanging lose it goes from the top of the block to a ground on the cab and from the ground the same wire splits i dont know where the secound half goes
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
