| From | Message |
grizz
Dodge Dakota
JOIN HERE
7/25/2010
14:00:05
|
 Subject: timing chain
IP: Logged
Message:
92 3.9L replaced the timing chain, cam and crank
gear with a cloyes set at 105000 miles. There was
no tensioner on the engine and none came with the
new set. All the chevy chains ive done had a
tensioner. What gives? thanks
|
LOL
Dodge Dakota
JOIN HERE
7/25/2010
16:52:10
| RE: timing chain
IP: Logged
Message:
You have to buy it separately!
|
jandjauto
GenII
8/03/2010
02:52:49
| RE: timing chain
IP: Logged
Message:
And you should use the tensioner with all chains
in the V6 because the cam sits .050 closer to the
crank and will have slop even when new
USE IT
Larry
J&J Auto
|
grizz
Dodge Dakota
JOIN HERE
8/08/2010
10:15:37
| RE: timing chain
IP: Logged
Message:
since none was installed at the factory, is there
a threaded hole in the block to add the tensioner?
|
no
Dodge Dakota
JOIN HERE
8/08/2010
14:47:23
| RE: timing chain
IP: Logged
Message:
it goes behind the chain and replaces the cam
retainer and chain oil
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
