| From | Message |
jammons5126
Dodge Dakota
JOIN HERE
12/20/2009
04:01:33
|
 Subject: water and engine. not good.
IP: Logged
Message:
why is it everytime i go through a puddle of water my engine starts acting real funny? it starts to shake and when i try to gas it, it wont go barely anywhere. i checked the air filter thinking it gpt wet but its not that. the filter is dry. anyhting else yall might know i can look at?
|
info needed
Dodge Dakota
JOIN HERE
12/20/2009
10:15:28
|  RE: water and engine. not good.
IP: Logged
Message:
What engine do you have?
|
jammons5126
Dodge Dakota
JOIN HERE
12/20/2009
11:48:16
| RE: water and engine. not good.
IP: Logged
Message:
3.9
|
Curly
Dodge Dakota
JOIN HERE
12/20/2009
17:58:19
| RE: water and engine. not good.
IP: Logged
Message:
Jammons Start with Cap, Rotor, Plugs and Wires.
|
Deeper
Dodge Dakota
JOIN HERE
12/21/2009
23:39:47
| RE: water and engine. not good.
IP: Logged
Message:
. i checked the air filter thinking it gpt wet.
If you went through water that HIGH your truck is now junk.....WTF
|
jammons5126
Dodge Dakota
JOIN HERE
12/21/2009
23:56:24
| RE: water and engine. not good.
IP: Logged
Message:
what would you think would be best for the Cap, Rotor, Plugs and Wires. what can i use that everyone else uses that they are happy with.
|
Tyler
Dodge Dakota
JOIN HERE
12/22/2009
23:06:49
| RE: water and engine. not good.
IP: Logged
Message:
Water does splash guys
|
MadeinAmerica
Dodge Dakota
JOIN HERE
12/23/2009
04:18:30
| RE: water and engine. not good.
IP: Logged
Message:
Go to your MOPAR dealership and get yourself some AMERICAN
made tune up parts. When you but American, you keep your job!!
Dab a bit of anti-sleeze on the 2 screws of the cap before you
install it, and youre all set for some wicked burn outs!!!
|
jammons5126
Dodge Dakota
JOIN HERE
12/23/2009
05:37:24
| RE: water and engine. not good.
IP: Logged
Message:
thanks tyler. i didnt submerge my engine in water. i aint that dumb. we had a flood it was raining hard and couldnt see the high water in front of me. i was going about 40 when i hit but the water only goes up half my rims. i aint really looking to do burnouts but i am looking to have power so when i go mudding i dont have to worry about getting stuff most the time. down here in texas we got some crazy mudd. especially on the gulf coast. thanks guys for the info. any more would be great.
|
Curly
Dodge Dakota
JOIN HERE
12/23/2009
14:17:00
| RE: water and engine. not good.
IP: Logged
Message:
jammons5126 Talylor, MSD, Borg Warner all good wires to name a few. Cap and rotor head to your local NAPA tell them you want Echlin Cap & Rotor.
They are made in the USA and have all brass inserts.
|
jammons5126
Dodge Dakota
JOIN HERE
12/24/2009
12:58:40
| RE: water and engine. not good.
IP: Logged
Message:
thanks curly i was gonna buy the cap and rotor but i didnt have a clue of what i needed. thanks.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
