| From | Message |
MadDakota
Dodge Dakota
JOIN HERE
12/18/2009
23:02:09
|
 Subject: TPS VOLTAGE
IP: Logged
Message:
Ive been screwing around with some ported TBs on my 92 3.9
I take a volt meter and measure the voltage at the tps, .71-.72
I take my snap on scanner and it reads .67-.68 volts, why is the
scanner reading a lower voltage?
|
DieselYellow
Dodge Dakota
JOIN HERE
12/20/2009
23:17:34
| RE: TPS VOLTAGE
IP: Logged
Message:
Yellow stone diesel parts plant is one of the leading manufacturers
of engine parts, in particular diesel fuel injection system
accessories for replacement, such as Fuel injection Nozzle, Plunger and
Delivery valve, ETC In south of china .
for more detail please visit our website : www.yellowstonediesel.com
www.dieselinjection.cn
Yellow stone diesel parts plant was founded in 1997.Over the years,
Yellow stone has grown and gained a reputation for producing
high quality products and delivering them on time.
|
?
Dodge Dakota
JOIN HERE
1/07/2010
13:04:15
| RE: TPS VOLTAGE
IP: Logged
Message:
Could be something with lead length
and also the calibration of either or both .
Could try someone elses meter or scanner .
In the end result either reading is very close to the ideal , so should not be an issue to be
concerned about .
|
Brandon
Dodge Dakota
JOIN HERE
1/09/2010
18:45:08
| RE: TPS VOLTAGE
IP: Logged
Message:
Mine was .68 until i preformed a TPS mod.
|
J and J Auto
GenII
1/21/2010
03:36:32
| RE: TPS VOLTAGE
IP: Logged
Message:
check volts by back probing the TPS volts at
computer pin
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
