| From | Message |
boltonranger
Dodge Dakota
JOIN HERE
8/27/2009
11:24:08
|
 Subject: Torque on 42RE band LOCKnuts critical?
IP: Logged
Message:
I've adjusted the rear band inside the trans. Used a torque wrench and counted out the turns to back off. Thing is I couldn't get my torque wrench on the LOCK nut. So I tightened it with a box wrench. It's not coming off - but will this be alright if it's a tad over the 25 or 30 ft lb spec for the locknut?
-br
|
Bob Lincoln
Dodge Dakota
JOIN HERE
8/28/2009
13:58:00
| RE: Torque on 42RE band LOCKnuts critical?
IP: Logged
Message:
Over is not a problem if you did not snap it off. Under is a problem, because the adjustment would change. Making sure the adjusting nut did not turn while you tightened the locknut is critical.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
