| From | Message |
freeHP
Dodge Dakota
JOIN HERE
7/25/2008
05:05:21
|
 Subject: cheapest mods
IP: Logged
Message:
so what are the chepest mods for gen III dakotas? i heard you can actually drill out the crankshaft position sensor?! anything else?
|
Problem Child
GenII
7/25/2008
21:02:25
| RE: cheapest mods
IP: Logged
Message:
You can also kick out the windshield, smash out the back window, roll the sides down, and have no drag, about 3+ MPG
|
Gears
Dodge Dakota
JOIN HERE
7/29/2008
18:50:06
| RE: cheapest mods
IP: Logged
Message:
Hey FreeHP,
Crank position sensor (CPS) mod
(you slot the mounting holes)
to up your timing 2-3 degree
throttle position sensor (TPS) mod
improves throttle responce
Intake Air Temp sensor (IAT) relocation mod
makes computer think it's running colder and fattens up the fuel mix alittle.
Plastic pipe cold air intake
get your pipe from Home Depot and a clamp on air filter from your local auto parts store.
$50 Dynomax super turbo muffler (#17748)
keep your stock tailpipe, just replace the muffler.
That's a start. Cheap!, less than $100 total
You should be happy starting with these mods
........Gears
|
GetaLife
Dodge Dakota
JOIN HERE
7/29/2008
19:14:26
| RE: cheapest mods
IP: Logged
Message:
Put Kowalski the polack on your tailgate. With all of the hot air he spews you will never have to use your engine.
|
smokin dakota
Dodge Dakota
JOIN HERE
7/29/2008
21:19:25
| RE: cheapest mods
IP: Logged
Message:
http://store.summitracing.com/partdetail.asp?autofilter=1&part=GRM%2D10%2D303&N=700+4294908110+4294840047+4294870106+4294925239+4294813803+115&autoview=sku cheap intake system with a spacer you can put nos on........
|
J and J Auto
GenII
7/29/2008
21:28:41
| RE: cheapest mods
IP: Logged
Message:
Change to all syn fluids also helps
Don't forget the power stearing pump I run amsoil
universal syn trans fluid in the pumps
Larry
J&J Auto
|
freeHP
Dodge Dakota
JOIN HERE
7/30/2008
01:22:35
| RE: cheapest mods
IP: Logged
Message:
I heard the spacers do DI*K but waste your money. i got a 20$ cherrybomb from pep boys and it sounds like i have a whole in my exhaust. the CPs mod sounds good but vague... how do you do it just drill the hole deeper??
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
