| From | Message |
Chris Wilson
Dodge Dakota
JOIN HERE
5/18/2008
08:38:18
|
 Subject: 1994 v6 3.9liter crank ques.
IP: Logged
Message:
Does anyone know the specifications and clearance tolerances on the crankshaft? going to replace rod bearings and trying to figure out whether to go back with stndard or oversized. Thanks.
|
well
Dodge Dakota
JOIN HERE
5/18/2008
12:03:13
| RE: 1994 v6 3.9liter crank ques.
IP: Logged
Message:
unless the crank was ground you wont fit oversized
|
dakota49
Dodge Dakota
JOIN HERE
5/18/2008
18:16:07
| RE: 1994 v6 3.9liter crank ques.
IP: Logged
Message:
Chris, the book calls for .0005-.0022 clearence for the main bearings, and rod bearings. You can go to .0025 on most bearings, but you would have to use some heavy oil to keep from having noise.
Hope this helps.
Dakota49
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
