| From | Message |
sport02
Dodge Dakota
JOIN HERE
9/18/2007
21:47:52
|
 Subject: steering pump
IP: Logged
Message:
2002 dakota 3.9
is the factory pulley on the steering pump pressed on or bolted on? i see an allen fitting right on front of the pulley. I thought about getting a rebuild kit and doing it myself. i can get the pulley off with a puller but how do i get it back on if there is no bolt to press the pulley back on. i know alot of pumps you buy come with a bolt and washer that you thread into shaft that will drive the pulley on but i don't think you can do this with the factory pump. any help please.
|
nice1
Dodge Dakota
JOIN HERE
9/21/2007
00:29:46
| RE: steering pump
IP: Logged
Message:
it's pressed on. the threads are further inside the shaft. if you can afford it you'd be better off getting a remanufactured pump, they are guaranteed and everything inside them is new including bushings. you need to get a pulley removal kit, you can remove and install with it.
|
greendak
Dodge Dakota
JOIN HERE
9/24/2007
11:02:27
| RE: steering pump
IP: Logged
Message:
Don't try to reinstall same pulley. Put a new one on b/c the old one will "walk" back off the pump shaft.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
