| From | Message |
Adam
Dodge Dakota
JOIN HERE
8/09/2007
17:57:09
|
 Subject: preformance computer?
IP: Logged
Message:
Help please I cant find a mopar pref. comp. for a 93 dakota V6, I found one on jeggs for a 5.2 but no luck on summit or mopar for a 93 3.9
Thanks
Adam
|
J and J Auto
GenII
 
8/09/2007
23:09:14
| RE: preformance computer?
IP: Logged
Message:
http://store.summitracing.com/
Put this in the search
DCC-5249521 $258.95
Takes about 2 weeks to get the comp
will work on 92 to 95 V6 and you must run 92 93
octain fuel the timming is 6 to 8 degrees advanced
from 1600 rpm on up no rev limiter on this comp
Larry
J&J Auto
|
ElmerFudd
GenII
8/10/2007
07:22:07
| RE: preformance computer?
IP: Logged
Message:
That's the part number I have on order for my 95. Might be longer than 2 weeks though, ordered mine May 2nd and arrival at Summit is Sept 17th date gets pushed back every week.
|
Adam
Dodge Dakota
JOIN HERE
8/10/2007
15:22:53
| RE: preformance computer?
IP: Logged
Message:
Thank you larry for all the help I really appriciate it, this should give a good kick in the ass when I boot it. I just got the harland sharp rr installed about a week ago and there SWEET!
Thanks again for all the help
Adam
|
Gears
Dodge Dakota
JOIN HERE
8/10/2007
20:58:50
| RE: preformance computer?
IP: Logged
Message:
Adam,
How do you like the RR's. Any tips on the install? I just got mine a week ago and haven't the time yet to install them. Did you replace the pushrods?
..........Gears
|
Adam
Dodge Dakota
JOIN HERE
8/10/2007
21:03:24
| RE: preformance computer?
IP: Logged
Message:
Larry in the other bulletin you said there are a few little perks that are easily worked around with the Mopar Performance computer, I was just wondering what they are? I ordered the computer from http://store.summitracing.com/ and hopefully it comes soon.
But thanks again for all your help it’s much appreciated and im sure I will have many more questions down the line
Thanks again
Adam
|
Adam
Dodge Dakota
JOIN HERE
8/10/2007
21:11:45
| RE: preformance computer?
IP: Logged
Message:
Gears
I love the Rockers!
No the Rockers are about the easiest things to install, just pull off the valve cover and remove the old one and install the new ones. No I didn’t replace the push rods; I inspected them for any signs of excessive rubbing or gawling on the tips. But it’s a simple remove, replace, and reset the computer.
You’ll love them!
Adam
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
