| From | Message |
Carson
Dodge Dakota
JOIN HERE
7/04/2007
15:06:34
|
 Subject: 88 3.9 fan conversion
IP: Logged
Message:
I've got an '88 3.9 Dakota and the fan clutch has gone bad and am looking to put an electric fan on. I've searched past posts and found something about a black magic 150. Will this work for an 88? The dimensions seem off. Thanks
|
Kenkura
Dodge Dakota
JOIN HERE
7/04/2007
15:14:53
| RE: 88 3.9 fan conversion
IP: Logged
Message:
I'm doing a E-Fan on my 91 Dak soon i just got my relay and controller and some other extras i wanted. the fan i'm using if srom a '94 ford taurus got it for free but i hear they are super cheap at a junk yard and will outpreform most aftermarket fans and as for the dimensions being off if its too big you have a problem but if the fan is slightly smaller than your rad it shouldnt be a big deal i know my fan is slightly smaller but i've heard them using these fans on supercharged fox body mustangs with no overheating.
|
J and J Auto
GenII
7/08/2007
01:14:10
| RE: 88 3.9 fan conversion
IP: Logged
Message:
3000 cfm I run a permacool 2950 16" and it works
great
I had a fan out of a 90 olds cutlas for years and
that worked good also
just make some brackets and mount in your fan
shroud
a good flexolite thermo control and a 30 amp relay
and your all set
summitracing has the thermo switch around $30
Larry
J&J Auto
|
Carson
Dodge Dakota
JOIN HERE
7/09/2007
00:26:03
| RE: 88 3.9 fan conversion
IP: Logged
Message:
So as long as I use a 3000 cfm fan in my shroud with wiring kit I'll be set right? Thanks for all the info.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
