| From | Message |
93 R/T
Dodge Dakota
JOIN HERE
5/24/2007
14:40:45
|
 Subject: 93 R/T
IP: Logged
Message:
I have a 93 rc/sb and it has the 3.9 in it rebuilt with 20,000 miles on it. I want to swap in a 2001 5.9 what all will I need to do the swap except for comp. and wiring? It has an underdrive kit on it and I want to put a cam, intake, and headers on it before it is intalled.
|
fotodak
Dodge Dakota
JOIN HERE
5/24/2007
23:07:12
|  RE: 93 R/T
IP: Logged
Message:
You'll need a complete wiring harness and
ECM for a V8 at the minimum.
|
Kenkura
Dodge Dakota
JOIN HERE
5/25/2007
00:32:18
| RE: 93 R/T
IP: Logged
Message:
in addition to wiring and a comp. you'll need a better radiator possibly motor mounts and a new tranny if you were just putting in a 5.2L you prolly be ok with v6 tranny but i doubt with a 5.9L R/T engine
|
fotodak
Dodge Dakota
JOIN HERE
5/25/2007
16:19:00
| RE: 93 R/T
IP: Logged
Message:
I used to have a 904 behind a 360 years ago with no problems, and I abused the thing. The 904 is an A500 without the o/d.
Chrysler put 904s behind 360s in Furys, Cordobas and the like for years.
As for motor mounts I don't know if the mounts are the same or if the mounting brackets are the same. Visit a bone yard and have a look, that should give you an idea of what you'll need.
|
Eddie
Dodge Dakota
JOIN HERE
5/25/2007
16:38:52
| RE: 93 R/T
IP: Logged
Message:
I have the engine, wiring, and comp. My tranny is a 5 spd. Will my crank sensor work?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
