| From | Message |
John93Dak
Dodge Dakota
JOIN HERE
4/18/2007
15:48:47
|
 Subject: Twin Turbo 3.9
IP: Logged
Message:
Anyone have plans/kits ti add a twin turbo setup on a 3.9? I have been looking at piecing one together and wanted to see if anyone else has done this.
|
John93Dak
Dodge Dakota
JOIN HERE
4/18/2007
17:07:43
|  RE: Twin Turbo 3.9
IP: Logged
Message:
In case people are wondering...so far have specked out a pair of Mitsubishi TE04H turbochargers and Saab SE 900 intercoolers for the system. With a little sheet metal, it will utilize the airflow from the valance under the front bumper.
I just wanted to check and see what other have done or what kits that other people have seen.
|
screwuphead
Dodge Dakota
JOIN HERE
4/18/2007
23:41:34
| RE: Twin Turbo 3.9
IP: Logged
Message:
there is only one guy that i know of that hooked up a twin turbo setup and made his own turbo manifolds out of the JBA headers, other then that people used the remote turbo setup.
Ive got my own setup that i am workin on right now but i need a Stand Alone computer because the computer in the dakota right now will able to read all of the compressed air thats coming into the engine and combust it correctly.
|
J and J Auto
GenII
4/19/2007
00:09:54
| RE: Twin Turbo 3.9
IP: Logged
Message:
What you need to do is the same as the vortech
super charger setup
run a second map sensor that will turn on a
secondary fuel pump on when it goes under boost
you need to raise the pressure at least 10psi
under boost to get enough fuel and the comp
will learn to run with this setup just like a
s/c
you will also want to run 1 colder plug
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
