| From | Message |
harry from ct
Dodge Dakota
JOIN HERE
3/24/2007
16:57:20
|
 Subject: larry>\?
IP: Logged
Message:
how do i do the crank sensor mod? and thanks for the rearend advice.......harry
|
J and J Auto
GenII
 
4/06/2007
00:21:50
|  RE: larry>\?
IP: Logged
Message:
pass side behind head bolted to bell
remove remove rubber grommit slot 3/8 and move
down toward oil filter
3 to 4 degrees advance
you can check this with a timing light
remove fuel pump relay in dist box under hood
#1 drivers side
have someone crank over and check
base is 10 befor top dead center
do the mod and recheck
I have gotten some that got 5 degrees advance
most are 3 to 4
after mod 13 to 15 BTDC
put relay back in and away you go it will take
a 50 to 200 mile to readjust running the advanced
timing the comp will learn and increase the
injectors pulse width
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
