Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
04:39:54 - 12/19/2018

V6 Dakotas
FromMessage
boomer
Dodge Dakota
JOIN HERE
 Email

3/27/2007
05:14:50

Subject: RE: 3.9 Suggested Mods?
IP: Logged

Message:
right, a voltmeter can read the voltage but how do you set it?



daddio
Dodge Dakota
JOIN HERE
 Email

3/27/2007
12:48:57

RE: 3.9 Suggested Mods?
IP: Logged

Message:
digital voltmeter, yes. it will be no more than 5 volts dc. so whatever range will cover that like 0-10 vdc. set it around .7 to .75 with the throttle closed. be careful not to overtighten the screws because you can put the TPS in a bind and it will not work properly.



sxtu4ea
Dodge Dakota
JOIN HERE
 Email

3/28/2007
15:31:47

RE: 3.9 Suggested Mods?
IP: Logged

Message:
Sounds like a great set of improvements for my Dakota. but how do they play with the California state CARB?? will it pass smog?

Thanks



barny
Dodge Dakota
JOIN HERE


6/26/2007
20:19:23

use the spacer for nos
IP: Logged

Message:
get a dry nos and drill holes in the side of the spacer and put in the nozzles



legendracer97
Dodge Dakota
JOIN HERE
 Email

6/28/2007
17:49:10

RE: 3.9 Suggested Mods?
IP: Logged

Message:
Just installed my new MSD 6a box, got a 2001 3.9L and didnt need the tach adapter by the way, so if anyone else plans on doing this, dont buy the adapter. Got some cool looking patterns on the scope today, and at 2000 rpm i was burning 0 HC's, 0.0 CO and 3.4 Nox, along with 16% Co2. Very efficient, even at idle it burned 28 HC ppm. just figured i'd post my results...



spl_kota
Dodge Dakota
JOIN HERE
 Email

7/23/2007
16:59:52

RE: 3.9 Suggested Mods?
IP: Logged

Message:
Just wondering exactly where and how to move the IAT sensor the way Larry said to? I'm confused about that. Another question is that I have Autolite XP 3924 sparkplugs in my truck ('95 SLT dakota 2x4 with the 3.9 and 120000 miles) and was wondering if they would work good with all these modifications? Thank you very much for any information.



legendracer97
Dodge Dakota
JOIN HERE
 Email

7/23/2007
17:52:56

RE: 3.9 Suggested Mods?
IP: Logged

Message:
For plugs personally i like the NGK Iridium IX, they are expensive, but will last way longer and smooth out the idle more than platinum plugs, plus autolite is truly a lame plug



ImtenseDak
Dodge Dakota
JOIN HERE


8/14/2007
22:28:43

RE: 3.9 Suggested Mods?
IP: Logged

Message:
I also installed the MSD6a a few years ago and it did nothing BUT throw codes. So do yourself a favor and get the tach adapter anyway. Or else you'll get stranded along the road.



Bump
Dodge Dakota
JOIN HERE


8/20/2007
19:41:29

RE: 3.9 Suggested Mods?
IP: Logged

Message:
bump



THe_MiLK_MaN
Dodge Dakota
JOIN HERE
 Email

1/20/2008
23:28:09

RE: 3.9 Suggested Mods?
IP: Logged

Message:
Just an update and question.

I have a 02' V6 CC in California. I just did all of the stated MODS except FMS. Thanks Larry!

I DID NOT hook up the Tach Adapter and I am not getting any codes. I do have it in case, but it has been about 100 miles and still no code.

The only problem I have is this...

When I start my truck it does not fire as quick as it used to. I used to be able to just turn the key for a split second and it would fire up. Now it takes a little longer. Is there a reason for this? I would assume that with the 6a I would still get the same start up.

What do you think guys?







cletus
Dodge Dakota
JOIN HERE
 Email

9/07/2018
12:23:18

RE: 3.9 Suggested Mods?
IP: Logged

Message:
im sure this hasent been looked at for years but iv
got a 1990 whats good power mods thats cheap




  <<Original Post <<Previous Page P 2


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.