| From | Message |
redrocket
Dodge Dakota
JOIN HERE
1/08/2007
19:07:09
|
 Subject: Removing upper arm bushings
IP: Logged
Message:
Anyone know the easiest way to remove the factory bushings out of the upper a-arm of a gen III
|
flatbed
Dodge Dakota
JOIN HERE
1/11/2007
19:32:41
| RE: Removing upper arm bushings
IP: Logged
Message:
I just did mine a few months ago and went through about 5 cold chisels and 10 or so drill bits. If you can get your hands on an air chisel, do so. Grind the rivets flat then drill the center out. This makes it easier to drive the old rivots out with a drift punch.
|
daddio
Dodge Dakota
JOIN HERE
1/12/2007
08:44:26
| RE: Removing upper arm bushings
IP: Logged
Message:
i haven't had to do it to my '00 yet but most i've seen are pressed in.
flatbed, i believe he's talking about control arm bushings not balljoints.
|
Shoe
GenIII
1/12/2007
17:55:03
| RE: Removing upper arm bushings
IP: Logged
Message:
Diddo, I was getting confused there for a second.
'97 RC V6, 5spd, soon to be V8, 5spd!
|
J and J Auto
GenII
1/16/2007
02:40:21
| RE: Removing upper arm bushings
IP: Logged
Message:
1 word
press
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
