Forums
Forum Tools
|
 |
03:06:23 - 04/26/2024
V6 Dakotas
| From | Message |
02sxt
Dodge Dakota
JOIN HERE
11/15/2006
22:17:08
|
 Subject: next mod
IP: Logged
Message:
so far i have a homebrew intake, dynomax superturbo(i kno , not supposed to do exhaust till intake is done but i couldn't pass this deal up, FREE for new muffler and instalatiion.2 1/4 inch piping for dual exit) I have done the crank sensor mod and I have new NGK 5 plugs. what next???
|
Wadak
GenIII
11/16/2006
13:41:38
| RE: next mod
IP: Logged
Message:
Try getting a Fastman or F&B throttlebody, both are very good. According to Larry from J and J Auto 15 to 18 hp at the wheels. If money is an issue get a throttle body from a newer 5.2 or 5.9 v8 newer being about 2000 or newer. The v8 throttle body unmodded will flow about 635cfm, the f&b will flow 660cfm, the fastman will flow about 550. The v8 may show a slight torque loss on the low end. The v8 throttle bodyt will perform even better if the airhorns are removed and the top inlets are smoothed out. It's your choice if your wnat the best go with the f&b ($380), next best fastman ($250 with exchange), v8 tb about 100 dollars or less thru the bone yard. You might have to change throttle cable if you get the v8 tb.
92 and 97 Daks both with many mods.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
