| From | Message |
dak03ota
Dodge Dakota
JOIN HERE
7/17/2006
14:11:46
|
 Subject: HVAC fan switch problem
IP: Logged
Message:
I have an 03 dakota and recently my HVAC fan rotary switch stopped working on the lowest setting. The AC will not engage and the fan will not come on when switched to the lowest setting. All the other fan settings work as they should. Does this sound like a bad switch? Or is it something else? Someone please gimme a hand here. Thanks.
|
zzark
*GenII*
7/17/2006
19:34:28
| RE: HVAC fan switch problem
IP: Logged
Message:
Bad blower motor resistor.
10-12 bucks at dealer.
Sorry, I don't know where it is on an 03
zzark
|
dak03ota
Dodge Dakota
JOIN HERE
7/18/2006
00:07:46
| RE: HVAC fan switch problem
IP: Logged
Message:
Thank You. Can anyone tell me where this is located on my truck and if it is an easy fix or not?
|
gb6491
Dodge Dakota
JOIN HERE
7/18/2006
04:14:14
| RE: HVAC fan switch problem
IP: Logged
Message:
Dealer part (sub $15)
Easy fix.
From JimmyD in another thread: "Look at the blower housing on the passenger side under the dash. You'll recognize the blower motor area right away. Go inboard just a bit and you'll see a connector going up into the plastic housing. That connector (5-wires, if I remember) is for the resistor board. Remove the two Phillips screws, and it'll come right out."
http://www.dodgedakota.net/boards/v8/8538.html
http://www.thegatesofdawn.ca/wordpress/?p=60
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
