Forums
Forum Tools
|
 |
11:13:35 - 04/19/2024
V6 Dakotas
| From | Message |
Sal
Dodge Dakota
JOIN HERE
7/06/2006
02:29:34
|
 Subject: Timing chain for 98 DAK
IP: Logged
Message:
I know I asked this question before, but I couldn't find the thread. I need to replaced my timing chain for a 98 DAK 3.9 and wanted to know if this part # CLO-9-1103 from summit racing would fit my engine? I also found the tensioner, part #DCC-5007709, just wanted to know if they would be the right parts before ordering.
Thanks
Sal
|
The Purple1
DakotaEnthusiast
7/06/2006
22:32:53
|  RE: Timing chain for 98 DAK
IP: Logged
Message:
Hi Sal!
Yes! The timing set and tensioner will fit. I believe any timing set that fits an older "small block" 273-360 Chrysler will fit a newer 3.9-5.2-5.9. And the tensioner that Mopar Performance sells there is the same as the factory installed item on '99 and up.
Someone should correct me if I'm wrong; And I hope they do!
Extreme Velocity Intake, 52 MM Holley Billet, Ported, Hughes Plenum Plate, Perma Cool Fan, Jacobs Pro Street, Moroso Ultra 40, Bosch 4, Superchips, CPS, IAT Mods, Dynomax Ultra Flo, Transgo, SLT Trim, Diamond Heads & Corners, Clear Tails, Hood Pins, APC White Gauge, PML Polished Trans & Diff Covers...
|
cuzindoug
GenIII
7/06/2006
23:18:00
| RE: Timing chain for 98 DAK
IP: Logged
Message:
Yes, I do believe you are correct, except for one thing, DC started installing the tensioners in late 97...right after they made my truck:)
If it doesn't fit, force it. If it breaks...well...it needed to be replaced anyway.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
