| From | Message |
screwuphead
Dodge Dakota
JOIN HERE
6/19/2006
12:56:35
|
 Subject: Valve Springs
IP: Logged
Message:
Does anyone know what vavle spring size i should get if i were to cam my dakota?!
Thats the cams i want.
Camshaft Technical Details
Intake Valve Lift 1.5
Exhaust Valve Lift 1.5 .480°
.489°
Intake Valve Lift 1.6
Exhaust Valve Lift 1.6 .512°
.520°
Intake Duration at .050"
Exhaust Duration at .050" 208°
214°
Lobe Separation Angle 114
Intake Opening at .050"
Exhaust Opening at .050" -7° BTC
44° BBC
Intake Closing at .050"
Exhaust Closing at .050" 35° ABC
-10° ATC
Min. Suggested Cylinder PSI 165
Sweet Spot RPM 1800 - 5500
|
daddio
Dodge Dakota
JOIN HERE
6/19/2006
16:18:57
| RE: Valve Springs
IP: Logged
Message:
just my opinion but, if the cam manufacturer cannot recommend a spring for your cam you've picked i'd find another manufacturer. most all of these guys offer cam kits with cams, lifters, pushrods, springs, etc.....
|
vern
Dodge Dakota
JOIN HERE
6/19/2006
18:22:03
| RE: Valve Springs
IP: Logged
Message:
it sounds like a hughes engine cam,so i,m going to assume it is,
so heres some #s springs double= 1111
single with damper= 1110
valve spring retainers for 11/32
valve stem= 1202
when in doubt ask when you order
you,ll need a flash or some pcm work to run that cam in a computer controled truck
|
J and J Auto
GenII
6/19/2006
21:27:56
| RE: Valve Springs
IP: Logged
Message:
It sounds just like the hughes cam the stock
rocker ratio in the mags is 1.6
You can get a spring kit from KRC that will
include everything springs retainers, keepers
and new seals for around $270 I think its nice
as a kit all parts needed and will handle
a .600 lift
Its actualy the R/T springs from mopar and they
will work fine and save time getting all the
seporite parts
You can also use your stock push rods lifters if
good and rockers all will work fine
Larry
J&J Auto
|
screwuphead
Dodge Dakota
JOIN HERE
6/19/2006
23:51:10
| RE: Valve Springs
IP: Logged
Message:
id like to get those beehive springs or is that too much?!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
