| From | Message |
nub
Dodge Dakota
JOIN HERE
4/07/2006
12:56:01
|
 Subject: djm balljoints
IP: Logged
Message:
i got a 2in drop lower a-arm from djm and im wondering if its possible to replace the ball joints on them?
i clipped a corner and the balljoint broke...
|
Scott C.
Dodge Dakota
JOIN HERE
4/08/2006
19:13:26
|  RE: djm balljoints
IP: Logged
Message:
the balljoints can be replaced but need to pressed out and pressed back in
Scott C
Royal Auto
|
Shatto
Dodge Dakota
JOIN HERE
4/11/2006
15:41:52
| RE: djm balljoints
IP: Logged
Message:
Clipped a corner??? At 180?
Anyway, I had the riveted ball joints cut,ground,sanded, drilled...I know, removed and replaced them with Moog's from the local parts emporium. They bolt on. Saves $400.00 or whatever outrageous price the dealer wants.
|
nub
Dodge Dakota
JOIN HERE
4/11/2006
23:09:52
| RE: djm balljoints
IP: Logged
Message:
well 20's didnt really help the fact that the ball joint popped out. but i found out that the djm pressed ball joint comes from like an 83-87 ford ranger, heh.
but yea i ended up bending the arm so apparently i have to replace the otherside too sense the arms are custom made so they may vary alittle from my old pair....
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
