| From | Message |
Shatto
Dodge Dakota
JOIN HERE
4/04/2006
22:28:11
|
 Subject: HOW do you remove the oil pan
IP: Logged
Message:
My mechanic and I doubled the time alloted to replace the oil pump and can't even get the pan out.
Removed motor mount bolts, mashed the transmission into the floor, disconnected the steering rack, begged, pleaded and still not enough room.
Suggestions please?
|
steven
Dodge Dakota
JOIN HERE
4/05/2006
01:21:56
| RE: HOW do you remove the oil pan
IP: Logged
Message:
take an engine hosit or crane and lift the engine out as far as possible but watch the distribitor does not hit anything the only other thing is remove the engine.
|
Shatto
Dodge Dakota
JOIN HERE
4/07/2006
11:04:59
| RE: HOW do you remove the oil pan
IP: Logged
Message:
Thanks.
Job done. New pump installed. Never did get the pan off.
Pressure went from 2-3lb idling to 10lb. 10lb running to around 30lb.
The electric gauge, with a new sender, lies and says I get 40 all the time. But I know the truth.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
