| From | Message |
Elliott
Dodge Dakota
JOIN HERE
3/01/2006
08:43:40
|
 Subject: v-6 throttle body
IP: Logged
Message:
How do you remove the throttle cable from a v-6 throttle body without destroying it?
|
Hmmmmmmmm
Dodge Dakota
JOIN HERE
3/01/2006
20:40:05
|  RE: v-6 throttle body
IP: Logged
Message:
There are three different styles. One is the ball and socket, the most common type. Just pop the cable off the ball. If it's a bit tight a little persuasion with a screw driver makes it easier. The disk type requires that you slide the end of the cable forward and off the disk. It kind of snaps over the disk so it might initially seem to be stuck. The third type is very similar to the cables found on bicycle brakes or motorcycles and come off the same way. If you don't know how that works just ask any kid that is into bikes.
|
Elliott
Dodge Dakota
JOIN HERE
3/01/2006
21:07:09
|  RE: v-6 throttle body
IP: Logged
Message:
Thanks, I have the ball and socket type and I thought it would pop off but I've broken lots of things that looked like they would come apart easily and wanted to check before I tried. Thanks again.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
