| From | Message |
TheTic
Dodge Dakota
JOIN HERE
10/01/2005
10:15:17
|
 Subject: exaust and intake manifold ?'s
IP: Logged
Message:
i have a 2000 3.9 and there are 2 bolts broken in the cylinder head from my exhaust manifold. also i have a coolant leak that seems to be coming from my intake manifold, i was wondering if anyone has had these problems and what they did to fix them.
|
DontBuyPete
Dodge Dakota
JOIN HERE
10/01/2005
16:16:53
|  RE: exaust and intake manifold ?'s
IP: Logged
Message:
Buy a new engine, you stupid MUTHER F@CKER.
|
DontBuyPete
Dodge Dakota
JOIN HERE
10/01/2005
23:53:31
| RE: exaust and intake manifold ?'s
IP: Logged
Message:
I think I will F@uck myself and eat my own sh1t.
|
cuzindoug
GenIII
10/02/2005
00:28:54
| RE: exaust and intake manifold ?'s
IP: Logged
Message:
I have never had that problem on my dak, but did have it on my old 77 F-150(Custom). Did you see exactly where the coolant was coming from? Most likely it will be from the t-stat gasket area, but if not then the fix is fairly cheap. Get a FELPRO gasket set from any autoparts store for your intake manifold($20-$40). As for the broken bolts...well, that is going to be a bitch!!! Is there any stud outside of the engine block that you can get to with a pair of vise-grips? If not you will have to drill and easy-out, drill and helicoil, or drill and retap.
If it ain't broke, fix it til it is.
|
s.a. dak
Dodge Dakota
JOIN HERE
10/02/2005
17:08:59
| RE: exaust and intake manifold ?'s
IP: Logged
Message:
had the same bolts broken on my 95, the best way is to drill and tap it, had someone almost try to put a little weld on mine but luckily stopped them before it was to late.
|
DonteBuyPete
Dodge Dakota
JOIN HERE
10/02/2005
21:16:22
| RE: exaust and intake manifold ?'s
IP: Logged
Message:
i think i will call up Big Ed and f*ck the crap right outa him and then play with his balls afterwards.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
