Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
12:56:55 - 04/25/2024

V6 Dakotas
FromMessage
Dave C
Dodge Dakota
JOIN HERE
 Email

9/13/2005
12:09:45

Subject: Changing shocks......
IP: Logged

Message:
How hard would it be for me to change out my shocks? I'm just putting on stock ones - nothing fancy. My truck still has the original shocks on it! Are there any tips that would make this easier for me to do? I'm not exactly an expert mechanic, but I know how to use most tools. I'm assuming that there are no special tools needed for this job. Thanks, Dave
1989 3.9 4WD 145,000 miles



cuzindoug
GenIII
 Email User Profile


9/13/2005
12:52:09

RE: Changing shocks......
IP: Logged

Message:
Original owner? Holy Sh1t!!! Those were some long lasting shocks!! It is really easy to change the shocks...on the other hand you are going to have ALOT of rust build up. The bottom bolts(mounted on axle) won't be too hard, but the upper(mounted on frame) are going to be the b1tch. 13/16 end wrench or socket(with breaker bar) if you have one, if I remember correctly. Don't try to turn on the nut on the uppers, it is fabricated with a metal stopper...so it won't turn, so you have to turn it from the bolt side.

If it ain't broke, fix it til it is.

Dave C
Dodge Dakota
JOIN HERE
 Email

9/13/2005
13:44:34

RE: Changing shocks......
IP: Logged

Message:
I don't have to jack up the axle or do anything to take the weight off the axle first? Probably a stupid question, but oh well.
My buddy has an air impact wrench. Would that be good to use on them?



cuzindoug
GenIII
 Email User Profile


9/13/2005
17:58:11

RE: Changing shocks......
IP: Logged

Message:
No jacking required. You will just have to compress the new shocks in place. The impact wrench would be a great help...but you have to see if you can fit it in there.

If it ain't broke, fix it til it is.

bigdave
Dodge Dakota
JOIN HERE


9/13/2005
21:22:40

RE: Changing shocks......
IP: Logged

Message:
the only special tool you may need is a long extension to get around the heat shield. I was unable to get an impact on my 97, hope you can.
Also like cuzindoug said about the rust, get some safety glasses, it sucks going to the ER to get rust out of your eye.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.